02-08-2017 05:41 AM - edited 03-17-2019 09:27 AM
please suggest is the below mention configuration for IP Phone will be ok ..or do i need to add any other parameter
I am facing issue with the conferencing on SCCP phone where it is Model 7945
!
ephone 2
mac-address D4A0.2A89.D388
max-calls-per-button 2
busy-trigger-per-button 2
ephone-template 1
presence call-list
type 7945
missed-calls all
keep-conference
button 1:2 2:50
!
!
ephone-dn 2 dual-line
number 9941
label TesTing-2
name TesTing-2
!
!
ephone-dn 50
number 9942
!
02-08-2017 05:52 AM
Hi
You are trying to conduct an ad-hoc conference ? The Max call and busy trigger values will only allow two calls you will need to raise the values. The below values determine how many calls can be placed on hold or how many call waiting will be available.
max-calls-per-button 4
busy-trigger-per-button 4
I have not done my home work on all the details of this model but it should be able to go up to 6 calls
02-08-2017 06:44 AM
You need to configure hardware conference as well otherwise by default you will be able to do 3 party conference only.
Suresh
02-08-2017 07:50 AM
Saying something doesn't work, without a proper explanation of the behavior, and what you have configured is futile. For a conferencing problem, the phone config is the least important part of this, how the conferencing is configured, is what needs to be reviewed.
ad-hoc?? meet-me??
Have you properly configured conferencing on CME?? The CME config guide has all the requirements, depending on what you're using, SW or HW.
02-08-2017 08:18 AM
HEllo Jaime,
Thanks for replay
We are using CME 11.5 on Cisco 2951/K9
as per the cisco Docs e configured "Three-Party Ad Hoc Conferencing"
below is what we configured on CME ..& SCCP Phone configuration is already shared..
is this will be enough...& still it is not working how can we troubleshoot on this .
!
!
telephony-service
sdspfarm conference mute-on * mute-off *
sdspfarm units 5
sdspfarm transcode sessions 128
sdspfarm tag 1 conference
conference hardware
no auto-reg-ephone
max-ephones 164
max-dn 450
ip source-address 10.20.233.10 port 2000
service phone webAccess 0
service directed-pickup gpickup
system message mGage Bangalore
url directories http://10.20.48.77:8091/ldap/start.php
url services http://10.20.48.77:8091/ldap/start.php root
load 7911 SCCP11.9-4-2SR2-2S
time-zone 39
time-format 24
max-conferences 4 gain -6
moh enable-g711 "music-on-hold.au"
transfer-system full-consult
fac standard
create cnf-files version-stamp 7960 Feb 08 2017 14:02:14
!
02-08-2017 08:36 AM
No, you're still missing conferencing related config.
You need to post ALL the conferencing config.
02-08-2017 08:57 AM
02-08-2017 09:02 AM
Post the output of:
show ephone-dn conference
02-09-2017 06:11 AM
Hello Jaime...
below is the output
VGW#sh ephone-dn conference
type active inactive numbers
=======================================
Ad-hoc 0 8 777
Any way issue was resolved ...& we are now able to make conference with SCCP IP Phones
Changed command ‘sdspfarm tag 1 conference’ to ‘sdspfarm tag 2 conference’ under Telephony-Service
where
dspfarm profile 1 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec g729br8
codec g729r8
maximum sessions 1
associate application SCCP
!
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 5
associate application SCCP
02-08-2017 08:58 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide