03-01-2012 06:45 AM - edited 03-16-2019 09:53 AM
Hi All,
I'm trying to configure CKEM-36 with "speed dial BLF" buttons (attached to a 9971).
I would like to have monitoring feature enabled on the programmed extensions, but it seems when an extension is busy, there is no indication on CKEM button associated.
I have Phone button template configured, and applied on the phone, I can see the configured extensions on this expmasion module as well.
Thanks in advance!
Thanks!
Tibor
Solved! Go to Solution.
03-01-2012 06:52 AM
So, you do not see the status updates?
Make sure you have applied correct "Subscribe CSS" to this phone.
Chris
03-01-2012 06:52 AM
03-01-2012 06:52 AM
So, you do not see the status updates?
Make sure you have applied correct "Subscribe CSS" to this phone.
Chris
03-01-2012 07:28 AM
Hi Chris,
Thanks for your help!
It solved the issue!
Kind regards,
Tibor
03-01-2012 06:52 AM
Hi Tibor,
Are you using CME or CUCM for call control?
Cheers!
Rob
03-01-2012 06:57 AM
Hi Rob,
It is a CUCM (forgot to mention....)
03-02-2012 02:39 AM
Don`t forget you also end to subscribe to the CSS on the END USER page as well
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide