07-07-2011 03:03 AM - edited 03-16-2019 05:49 AM
How can you list the DSP modules in a gateway without opening up the box ?
GTG
Solved! Go to Solution.
07-07-2011 04:04 AM
hello,
you can use the "show voice dsp group all"
and the "show diag" to have all the hardware on the platform.
good luck
please do not forget to rate this !!!!!!
07-07-2011 04:26 AM
also you can use show diag
then you will see all the hardware insstaled in your router in cuding VIC/WIC/NM PVDMs cards and its DSPs
good luck
if helpful Rate
07-07-2011 04:04 AM
hello,
you can use the "show voice dsp group all"
and the "show diag" to have all the hardware on the platform.
good luck
please do not forget to rate this !!!!!!
07-07-2011 07:02 AM
show diag is the best option, as it clearly shows the model & channel allocation of the DSPs. (e.g. PVDM3-16)
show dsp group all is OK, but doesn't give easilly what I'm after.
Thanks,
GTG
07-07-2011 04:26 AM
also you can use show diag
then you will see all the hardware insstaled in your router in cuding VIC/WIC/NM PVDMs cards and its DSPs
good luck
if helpful Rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide