08-06-2014 10:45 PM - edited 03-16-2019 11:39 PM
After installing a locale on a server, the install "Status" message says:
"A reboot is not necessary for the changes to take effect."
Yet the install log ominously proclaims:
"WARNING: Locale changes MAY NOT BE FULLY AVAILABLE until the server has been restarted!"
So is a reboot necessary to activate locales or not?
GTG
Solved! Go to Solution.
08-06-2014 11:24 PM
Hi Ross,
Yes, u need to restart the server.
http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers#CUCM_User_Locale_and_Network_Locale_support
Yes, Cisco Unified Communications Locale Installer MUST be applied to each and every Cisco Unified Communications Manager server in a cluster, starting with the publisher. After installation has completed, it is essential to reboot each and every platform in order for all user and network locale changes to become fully activated.
regds,
aman
08-06-2014 11:24 PM
Hi Ross,
Yes, u need to restart the server.
http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers#CUCM_User_Locale_and_Network_Locale_support
Yes, Cisco Unified Communications Locale Installer MUST be applied to each and every Cisco Unified Communications Manager server in a cluster, starting with the publisher. After installation has completed, it is essential to reboot each and every platform in order for all user and network locale changes to become fully activated.
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide