12-09-2015 01:11 AM - edited 03-17-2019 05:09 AM
Hello everyone
Is there a way to bulk edit the settings access setting on phones?
I want to change all phones in a device pool from disabled to restricted.
I can't find anything under Bulk Administration.
Any help would be greatly appreciated.
Solved! Go to Solution.
12-09-2015 01:36 AM
I tested on cucm 10.5 but i believe this would work on cucm 9.1.2 as well. You might be selecting all types of phones in the Query section and it will not show the Settings field since all models do not have this option. Try selecting specific phone type like 9971 in the Query section and it will show the Settings field on next page. Do let me know if it works.
Manish
12-09-2015 01:20 AM
Hi,
You can go to Bulk Administration Tool > Phones > Update Phones > Query > Next and then on next page you get option to edit the Settings
Manish
- Do rate helpful posts -
12-09-2015 01:31 AM
12-09-2015 01:36 AM
I tested on cucm 10.5 but i believe this would work on cucm 9.1.2 as well. You might be selecting all types of phones in the Query section and it will not show the Settings field since all models do not have this option. Try selecting specific phone type like 9971 in the Query section and it will show the Settings field on next page. Do let me know if it works.
Manish
12-09-2015 01:39 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide