cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
629
Views
10
Helpful
5
Replies
Enthusiast

Mass push to Touch 10

Hello All,

Is it possible to somehow push a change from TMS or CUCM to lock the settings on all Cisco Touch 10s across the enterprise?

I know you are able to lock the Touch 10 settings via the endpoints GUI in the setup tab under "UserInterface" -> “SettingsMenu Mode”

Is there a way to mas push this change to all touch 10s?

1 ACCEPTED SOLUTION

Accepted Solutions
Enthusiast

Re: Mass push to Touch 10

Thank you I have a script to push from TMS, this will effect all touch panels.

Go to System > Configuration templates > New configuration template

Select advanced settings, in the filter type 'custom config, choose 'all systems' from the drop down and search.

Select 'custom config against ‘Cisco Telepresence CE endpoints’.

Save the template.

Edit the template > Click on template settings > select the custom command check box and type the following in the box against it:

<Configuration><UserInterface><SettingsMenu><Mode>Locked</Mode></SettingsMenu></UserInterface></Configuration>

Navigate to the configuration template and select “set on system”.

5 REPLIES 5
Contributor

Re: Mass push to Touch 10

You should be able to use a configuration template in TMS to push the settings change en masse.

Thanks,

Darren

Enthusiast

Re: Mass push to Touch 10

Thank you I have a script to push from TMS, this will effect all touch panels.

Go to System > Configuration templates > New configuration template

Select advanced settings, in the filter type 'custom config, choose 'all systems' from the drop down and search.

Select 'custom config against ‘Cisco Telepresence CE endpoints’.

Save the template.

Edit the template > Click on template settings > select the custom command check box and type the following in the box against it:

<Configuration><UserInterface><SettingsMenu><Mode>Locked</Mode></SettingsMenu></UserInterface></Configuration>

Navigate to the configuration template and select “set on system”.

Beginner

Re: Mass push to Touch 10

If the endpoints are behind the firewall,  does this script work well? 

Highlighted
Contributor

Re: Mass push to Touch 10

Hi Kaliafeh,
take a look at CE9.4.0 release note
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/ce9/release-notes/ce-software-release-notes-ce9…

CUCM provisioning of the admin settings lockdown configuration page 16
CE9.4.0 has added support for CUCM provisioning of the admin settings lockdown configuration that was introduced in CE9.2.1 (please see the CE9.2.1 feature description in this document for more information). The settings menu can now be locked down on all the endpoints using bulk configuration via CUCM. Note that your CUCM may require the latest device pack in order to expose the new fields for this configuration.


Rate if help


Regards

Sandro

Enthusiast

Re: Mass push to Touch 10

Thank you, I did see this unfortunately I will not be able to take advantage of this.

To do this we will need to update all units.

We are going to push a script through TMS that will lock the panels.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards