06-09-2008 05:10 AM - edited 03-15-2019 11:09 AM
Dear all,
I have Cisco 2811 with CME 12.T version, the present setup have max. no of IP Phone support is 48, If i want to add more phone what additional license/card or module i need to purchase?
This Box will support more phones or not, i want to know.
Thanks
AK
06-09-2008 05:15 AM
AK,
2811 supports max of:
36 SCCP Phones
144 Ephone-DNs
CME is not a so bug free setup, so i recommend to follow the guidelines from the cisco site:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme402sp.htm
Hope it helped
Regards.
Met.
06-09-2008 05:15 AM
Actually a 2811 should support only 36 phones, and will not support more than that (actually a bit more, type ? after max-ephones).
There are no licenses that you can buy to increase that number.
As a workaround you can configure additional phones in SIP, but I would NOT recommend that and you should buy a bigger router instead.
Hope this helps, please rate post if it does!
06-10-2008 09:14 PM
Wat about Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory.
Is it restricted to 48 IP phones ?
thanks
Aman
06-11-2008 12:15 AM
Actually 52, because Cisco allow form some excess from the marketed numbers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide