08-16-2012 09:10 PM - edited 03-16-2019 12:45 PM
Dear Sirs/Madams,
2 Meetme session (ext 299 and ex 298) have been created in CME 7.0 installed in Cisco 2921. We can open meetme session with ext 299 or 298 and they can call to 299 or 298 or any outside direct line too. However, when we dial another mobile phone or IDD and want to transfer to meetme ext 299, it show "tansfer-busy". Does anyone know what is the problem is?
Please help.
Thanks
Kenny
08-20-2012 08:14 PM
anyone knows the problems. Please help.
Kenny
08-21-2012 07:18 AM
Hi Kenny,
The only thing I can think of is that you may be trying a "Consult" vs "Blind"
transfer.
Cheers!
Rob
"Always movin' ahead and never lookin' back" - Springsteen
08-23-2012 07:08 AM
Dear Rob,
I will try and let you know.
Thank yoiu.
Kenny
08-26-2012 08:47 PM
Dear All,
try that mode and not work It is a bit strange that normally when i initiate the MeetMe session. Most likely the first transfer call should be ok. However, after the second transfer call will show " transfer-to-busy" message in phone screen. Is it Cisco 2921 model with cme 7.1 don't support the transfer call function to MeetMe?
Please help
Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide