cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1186
Views
5
Helpful
3
Replies

MGCP Off-hook events

actualabhishek
Level 1
Level 1

Which parameter in a NTFY message is used by Cisco IOS MGCP gateway to inform CUCM that analog
endpoint has gone off-hook?
is it a Observed Event or Requested Events?

Thanks

Abhi

1 Accepted Solution

Accepted Solutions

Jitender Bhandari
Cisco Employee
Cisco Employee

Hi Abhi.

it is an Observed event

Below is the NTFY message explained.

NTFY 41 #Notify

message sent to call agent to report observed event.  41 is the notify sequence number.


aaln/S1/SU0/1@c26001.atl0.cbeyond.net #MGCP endpoint ID
MGCP 0.1  #MGCP version is 0.1
N: mgcp.aSCT1CA.atl0.cbeyond.net:2427 #Notified Entity ID with destination UDP Port number
X: 50  #Request ID is 50


O: L/hd  #(O)Observed event (hd) off hook detected using (L) Line Package

HTH

JB

View solution in original post

3 Replies 3

Jitender Bhandari
Cisco Employee
Cisco Employee

Hi Abhi.

it is an Observed event

Below is the NTFY message explained.

NTFY 41 #Notify

message sent to call agent to report observed event.  41 is the notify sequence number.


aaln/S1/SU0/1@c26001.atl0.cbeyond.net #MGCP endpoint ID
MGCP 0.1  #MGCP version is 0.1
N: mgcp.aSCT1CA.atl0.cbeyond.net:2427 #Notified Entity ID with destination UDP Port number
X: 50  #Request ID is 50


O: L/hd  #(O)Observed event (hd) off hook detected using (L) Line Package

HTH

JB

Many thanks Jitender!

Happy to help. in case you dont have further questions please mark the thread as answered.

JB