03-30-2017 08:01 AM - edited 03-17-2019 09:56 AM
All,
How do I modify the INVITE with CUCM on a SIP Trunk? Specifically I would like to remove h.264 from the Early Offer.
SIP Profile/Normalization Script? I have never done this before and am struggling.. So would appreciate any guidance or clear documentation.
Thanks
D
Solved! Go to Solution.
04-03-2017 07:33 PM
You can go through this video tutorial:
https://supportforums.cisco.com/video/12151771/guide-sip-normalization-cucm-and-lua-scripting
Regards,
Chakshu
03-30-2017 07:20 PM
Is the call going out to voice gateway?
Can you paste the current SIP INVITE and the desired SIP INVITE.
03-30-2017 11:52 PM
Hi,
Call flow is from CUCM via SIP Trunk to a CUBE, but my question is can I modify the INVITE at the CUCM side? Or should this be done on the CUBE?
Thanks
D
04-01-2017 08:04 PM
It will be easier on CUBE, create a sip profile and associate is with dial-peer
You can create a SIP profile like this:
voice class sip-profiles 100
request INVITE sdp-header Audio-Attribute modify "a=rtpmap:97 H264/90000" ""
Hope this helps.
04-02-2017 11:37 PM
Thank you for your help so far. Can you please advise though how this can be done in CUCM? Say that I had no CUBE and this was 2 CUCM clusters with a SIP Trunk, how would I do this in that example please?
Thanks
D
04-03-2017 07:33 PM
You can go through this video tutorial:
https://supportforums.cisco.com/video/12151771/guide-sip-normalization-cucm-and-lua-scripting
Regards,
Chakshu
03-31-2017 04:08 AM
Hi Chakshu,
Here is a snippet from the SDP INVITE:
I have highlighted what I would like to remove.
Thanks
D
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide