cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
697
Views
5
Helpful
3
Replies

MOH file configuration on the IP Phone

ciscoroyzhang
Level 1
Level 1

  Hi there,  just a quick queiston. in CUCM 8.6,  how can I stop the MOH on a phone.  I would like to stop MOH on a phone. Let say there are phone A and Phone B. on Phone A, both device information page and line configuration page, the MOH source file set to NON and there is no Coommon Device configuration configured. same to the Phone B.

Now, when I ring from phone A ot Phone B and press Hold button, the Phone B can still hear the cisco default MOH music. there must be some place with system wide configuation which enalbe Phone A to choose the sample file to play for the phone on hold. Any one know the answer?  tnk. Roy

3 Replies 3

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Hi,

You need to remove the MRGL from the phone as well. You should also check if there is a MRGL assigned to the Device pool

Please rate all useful posts

Rob Huffman
Hall of Fame
Hall of Fame

Hi Roy,

Just to add a note to the good tips from Deji (+5 )

Have a look at this excellent doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a0080094766.shtml#q20

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

nikshah
Cisco Employee
Cisco Employee

Just set the run flag to false.

Sent from Cisco Technical Support Android App