06-26-2013 09:05 AM - edited 03-16-2019 06:05 PM
Hi There,
Is it possible to have more then one SIP provider setup on a 2821 with CME 7 ? I have a UK provider I am using for a UK number and to call out to the UK and would like to set up one for Germany and Switzerland.
Solved! Go to Solution.
06-26-2013 06:24 PM
Look at the following document:
Configuring Multiple Registrars on SIP Trunks
http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-multi-registrars.html
HTH
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
06-26-2013 11:00 AM
I have deleted my postings here, that were 100% correct and made with will to help, due to the low rating unfairly received.
06-26-2013 11:20 AM
Your posting are brief and provide very little help as they did in the last conversation I started and you chose to comment, advising me to seek a professional to do the setup for me. If I wanted a professional to do the install for me then I wouldn't be posting here would I.
06-26-2013 06:24 PM
Look at the following document:
Configuring Multiple Registrars on SIP Trunks
http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-multi-registrars.html
HTH
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide