MQC QoS - C3650 - DSCP Trust

[Mark Bowyer]

Hi,

We are migrating from 3750's to 3650's and I need to move the QoS over. In my policy map I would normally trust DSCP, but on the 3650's, there doesnt seem to be a trust DSCP command. Below is my policy map config:

policy-map vvc-map
class voice
trust dscp
class video
trust dscp
class control
trust dscp
class control-VoIP
trust dscp

Does anyone have any ideas on what has replaced the trust DSCP command in the policy map or is there a different way of doing it now?

Thanks,

Mark

[Carlo Poggiarelli · Accepted solution]

Hi Mark

In IOS XE (3650/3850) no trust dscp option on policy map config.

Here is a doc on how trust works on those switches.

http://www.cisco.com/en/US/docs/solutions/Enterprise/Video/qoscampuscat3x50aag.html#wp1052949

HTH

Regards

Carlo

[Mark Bowyer]

Thanks!