08-26-2014 02:59 PM - edited 03-16-2019 11:54 PM
Hi,
I have a fairly (basic) dial plan question. I need all inbound calls from the PSTN to go directly to our Unity Express Auto Attendant number which is currently extension 502. I thought I had set this up correctly in CME (8.6) but I keep getting a message that the number cannot be reached. Any help is appreciated as I may have missed something. Here is the abbreviated Config:
Current configuration : 12212 bytes
!
! Last configuration change at 14:11:35 PST Tue Aug 26 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tue Aug 26 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tue Aug 26 2014 by routeradmin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname voicerouter
!
boot-start-marker
boot-end-marker
!
!
card type t1 0 0
enable secret 4 t3Ic8qb5ewMDWvTa4L9l1WMKprop/NnpCj9WtdkqGGc
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec login local
aaa authorization network login local
!
!
!
!
!
aaa session-id common
!
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
!
no ipv6 cef
ip source-route
ip cef
!
!
!
ip dhcp excluded-address 192.168.8.1 192.168.8.19
!
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
!
!
!
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-ni
!
crypto pki token default removal timeout 0
!
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
!
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
!
!
!
!
voice translation-rule 1
rule 1 /9400/ /502/
!
voice translation-rule 2
rule 1 /.*/ /5415489400/
!
!
voice translation-profile Inbound_Calls_To_CUE
translate called 1
!
voice translation-profile Local-CLID
translate calling 2
!
!
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
!
hw-module sm 1
!
!
!
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
!
redundancy
!
!
!
!
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-10,24
!
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
zone-pair security untrusted-to-trusted source internet destination trusted
!
!
!
!
!
!
!
interface Loopback0
ip address 192.168.17.1 255.255.248.0
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
!
ip forward-protocol nd
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
!
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
!
!
!
!
!
!
tftp-server flash:apps31.9-3-1ES26.sbn
tftp-server flash:term31.default.loads
tftp-server flash:SCCP31.9-3-1SR4-1S.loads
tftp-server flash:jar31sccp.9-3-1ES26.sbn
tftp-server flash:dsp31.9-3-1ES26.sbn
tftp-server flash:cvm31sccp.9-3-1ES26.sbn
tftp-server flash:cnu31.9-3-1ES26.sbn
!
!
!
control-plane
!
!
voice-port 0/0/0:23
!
!
!
mgcp profile default
!
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 version 4.0
sccp
!
sccp ccm group 15
associate ccm 1 priority 1
associate profile 1 register CFBOWH
keepalive retries 5
!
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 10 pots
translation-profile incoming Inbound_Calls_To_CUE
!
dial-peer voice 20 pots
translation-profile outgoing Local-CLID
destination-pattern 9..........
port 0/0/0:23
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
protocol mode ipv4
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
load 7931 SCCP31.9-3-1SR4-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh flash:/moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp 7960 Aug 26 2014 12:49:29
Solved! Go to Solution.
08-26-2014 03:45 PM
Hi,
Can you try adding this to your dial peer 10 pots
!
dial-peer voice 10 pots
desc *** MATCH INCOMING CALLS ***
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
!
Then retest
Regards
Alex
08-26-2014 03:45 PM
Hi,
Can you try adding this to your dial peer 10 pots
!
dial-peer voice 10 pots
desc *** MATCH INCOMING CALLS ***
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
!
Then retest
Regards
Alex
08-26-2014 05:31 PM
Alex,
Thank you very much that worked perfect!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide