cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1800
Views
0
Helpful
4
Replies

need help on equipment that can convert h323 to sip and transcoding

rcandeloza
Level 1
Level 1

hi,

Can you help me, Im new with VOIP. Need our help to choose an equipment that can convert h.323 to SIP (or vice versa) and do transcoding and can support 3000 concurrent calls?  I need an IP-to-IP Gateway equipment.

Don't know what device and module to use for this.

Thanks in advance!

1 Accepted Solution

Accepted Solutions

Yes, the purpose of CUBE is to convert signaling formats.

In your case you need to bridge SIP to H323 and the other way around

If there are not TDM interfaces and you don't need XCODER or MTP there should be no need for DSPs.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

Thta's 300 Kpps, to be on the safe side I would use a 3925E.

Jaime Valencia
Cisco Employee
Cisco Employee

There are many factors involved in choosing the right equipment.

I'll assume the worst case scenario and those 3K calls will need XCODER.

That would be 3 X 3945E (1200 CUBE + XCODE each)

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hi,

We have decided to use one 3945E that can support 2500 calls. And now we just need to convert H.323 to SIP (and vice versa), do i still need a CUBE for this? And do I need PVDM modules?

Thanks,

Rachelle

Yes, the purpose of CUBE is to convert signaling formats.

In your case you need to bridge SIP to H323 and the other way around

If there are not TDM interfaces and you don't need XCODER or MTP there should be no need for DSPs.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate