07-15-2013 10:19 AM - edited 03-16-2019 06:22 PM
Hi everyone, I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!
11-23-2013 10:08 PM
Hi everybody,
I have the same problem.
Anyone any idea?
Thanks in advance.
06-29-2015 11:50 AM
This discussion has been reposted to the CSC Content with No Valid Community to Post community.
03-15-2014 10:57 PM
03-15-2014 10:59 PM
My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work.
08-22-2015 03:40 AM
08-22-2015 06:57 AM
EPC3925's firmware is customized according ISP wishes. Thus your EPC3925 may offer other set of features than EPC3925 manufactured for other ISP.
Because of it you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide