cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
187
Views
0
Helpful
2
Replies

Network Map Design for Traditional PBX and VoIP

just like the title, im just look for network map for traditional pbx and how to change it to voip technology.

thank you before

2 Replies 2

Manish Gogna
Cisco Employee
Cisco Employee

Hi James,

A few useful links that you can refer below

https://communities.cisco.com/docs/DOC-6303

http://www.cisco.com/networkers/nw00/pres/2100.pdf

However, it is recommended to engage a Partner or Cisco Account team to help with designing , validating and implementing.

Manish

- Do rate helpful posts -

Chris Deren
Hall of Fame
Hall of Fame

Have a look at the Network section of Cisco Collaboration SRND 11.X:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/netstruc.html

It's a good start to point out requirements, etc. however getting deeper into specific designs and considerations will require assistance from someone with proper network/voice experience.