No CLI access to Call Manager MCS 7800

[Steve Davis]

Hello, my client has a Call Manager server MCS 7800.  We have access to the GUI, but the former IT Manager's network docu

mentation has an incorrect password for telnet access.  How can we go about recovering or resetting this password?  I've also posted this in another discussion, so i apologize if anyone gets this post twice.

thanks for any help in advance.

[William Bell · Accepted solution]

Not sure which version you are running, but in the later versions the

following procedure should be used.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch2

.html#wp1040303

HTH.

Regards,

Bill

Please remember to rate helpful posts.

On 7/12/10 7:51 PM, "sdavis@diamondtechsolutions.net"