NONE Softkey templete

[Murali Dharan]

Hello All,

Hope some one help me on this. What are the options I will get on the phone if I choose <NONE> in sfotkey templete in phone cofiguration page.

Thanks.

M

[Rob Huffman · Accepted solution]

Hi Murali,

If you choose in the Softkey Template then you will

use the Softkey that is referenced in the Common device config

like below. In this case,

MigratedCommonProfile2

which uses the Standard user Softkey template

Common Device Configuration Information

Name
Softkey Template	Standard User -- Not Selected -- Mobility_SK Mobility_SK 7912 Standard Assistant Standard Feature Standard Manager Standard Protected Phone Standard Shared Mode  Manager Test no CFWD  User
User Hold MOH Audio  Source	12-HoldThePhone.ULAW < None > 1-SampleAudioSource 3-SampleAudioSource 10-SampleAudioSource 11-SampleAudioSource
Network Hold MOH Audio  Source	12-HoldThePhone.ULAW < None > 1-SampleAudioSource 3-SampleAudioSource 10-SampleAudioSource 11-SampleAudioSource
User Locale	< None > English, United States Italiano,  Italia norsk, Norge français,  La France Russkij, Rossia Deutsch, Deutschland Dansk, Danmark Svensk, sverige Nederlands,  Nederland español, España português, Portugal
IP Addressing Mode	IPv4 Only IPv6  Only IPv4 and IPv6
IP Addressing Mode Preference for  Signaling	IPv4 IPv6 Use System  Default
Allow Auto-Configuration  for Phones	Off On Default
Use Trusted Relay  Point

Cheers!

Rob

"I don't know how, I don't know when
But you and I will meet again " 

- Tom Petty

[Murali Dharan]

Thanks a lot Rob,

-M