Not working after 24 hours when enabling call forward All in IP phone 7945

[Anbu_cisco]

Hi..

Can anyone help me here!

I ahve 7945 phone and when enabling call forward all from phone its working and after 24 hours its not functioning.

The current firmware version is SCCP45.9-0-2SR1S.

Thanks,

Anbarasan

[jfernandorosa]

Hi,

Do you have other models the IP Phone with same problem?

CUCM don´t check time for this, if problem is in 7945 upgrade the Fw for latest version (9-3-1SR2-1).

Regards.

J Rosa

.

[Jaime Valencia]

So, the phone and CCMAdmin still show the CFA but the phone rings?

But only after 24 hours?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Anbu_cisco]

Hi,

Yes, the CFA get removed automatically after 24 hours and the phone rings.

Thanks and warm regards,

Anbarasan P

[mkchandak]

What is your CM ver ?

[Anbu_cisco]

The current version  is 8.0.2.40000-1

[mkchandak]

I'm not aware of any specific defect with this version of CUCM which causes CFA to stop working. If the phones are registered to the subscriber, change the Device Pool on a couple of phones such that they register to the publisher. When registered to the publisher, if this issue doesn't occur, then this would normally point to a DB replication issue and therefore you would need to fix DBReplication first.

[amarjit4321]

Hi,

Are both the phones sharing same device pool?