Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I'm trying to register a DX80 to EXP-C via EXP-E. Setup:
DX80 <-- Internet --> EXP-E <--DMZ--> EXP-C.
This setup keeps failing. Documentation for EXP does not show this option. Is this supported with EXP series or does this need to go through...
Hi,I have a requirement where there is a need to use Local DHCP Server when there is a WAN failure (Small site connected by a Single WAN link)Setup: Client ---- Switch ---- Router ---- WAN ----- Centralized DHCP Server. There is only 1 L3 device on r...
@Jaime Valencia: Doesn't MRA work with CUCM. The setup doesn't have CUCM. This is from EXP-E to EXP-C.
@Randy Valverde Rojas: I have all these configured and i still cant get the DX to register.
Documentation for VCS/Expressway beats me. There is...
Hi Pushkar,Yes, that can be done. You can register the CallManagers with each other using Inter cluster Trunks. These ICTs would work similiar to a H323 Gateway.You can add them to each other and take it from there.Here is some more info on the same...
On the second router, how is your DSP resources configured. Have you created a loopback IP Address on that and tried to bind the DSP resources to the loopback instead of gig interface ?
Hi MichaelWith CallManager Express (CME), there is no native call detail record (CDR) available on the router. When using CME, you will have to use an External Server where you can export call records and other details. Here is a link which should h...
Yes, you can create ICTs from CUCM 5.1 and 8.5. When you create these trunks, it is as good as adding a H323 trunk. Therefore the trunk status would show unknown. On calls not going through, you might want to consider the number of digits being diale...
