01-03-2012 12:58 PM - edited 03-16-2019 08:47 AM
Hello Everyone,
I have a need to configure a Busy Lamp Field on a Cisco 7975G to monitor the status of two DN on another telephone without using the Presence feature.
Here is the scenario .....
User A has two different DN on their 7975G (neither are shared). User B has a need to see anytime User A is on either line, but I am restricted to using one button.
Is this possible on CUCM 8.0?
01-03-2012 01:13 PM
Sorry, cannot be done, only 1 to 1 relationship is available via BLF.
Chris
01-03-2012 01:19 PM
Just a sidenote, CME can do this. "watch phone".
01-03-2012 01:29 PM
Paolo,
This is very good information to know (+5 points for sharing).
Chris
01-04-2012 05:36 AM
Thank you Chris. Also rated your answer, as always concise and correct.
01-03-2012 01:25 PM
Let's try another route then ...... again, no Presence server available ......
I have a shared line ...... the BLF goes red when someone else picks up the shared line. Is there anyway to see which telephone (user) picked up the shared line?
01-03-2012 01:26 PM
Let's try another route then ...... again, no Presence server available ......
I have a shared line ...... the BLF goes red when someone else picks up the shared line. Is there anyway to see which telephone (user) picked up the shared line?
01-03-2012 01:29 PM
Nope, not with CUCM (not sure about CME).
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide