Overhead paging (Muzak)

[thomascollins]

Anyone have any experience interfacing with Muzak for overhead paging?  This isn't MoH.  We have a legacy overhead speaker system, wired into a Muzak system.  That system requires 600 ohm balanced input.  We use a device called a Bogen TMB2 to answer an analog line and interface with the Muzak.  So we then use a VG200 adapter to interface with the Bogen.

We can't replace Muzak, but we would love to replace the Bogen and VG adapter.

Does anyone know of any IP solutions that could connect with SIP/Call Manager, then interface with the Muzak via Analog output?

Thanks

[Leo Salcie Tejeda]

Hi Thomas,

You can use a Cisco ATA 187. Be aware it have a FXS port (not fxo).

Regards

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie