cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1538
Views
0
Helpful
3
Replies
bkhanal1971
Participant

Panasonic KX-TDE200 and CUCM Integration

Hello:

I have a Panasonic KX-TDE200 PBX in remote location and CUCM cluster in HQ. Both sites connect using site-to-site VPN. I want to integrate the Panasonic PBX with the CUCM so that intersite calls are free. Can someone point me to the right document/instruction as to how this can be done.

Thanks,

3 REPLIES 3
paolo bevilacqua
Hall of Fame Master

You will need to equip the PBX with either VoIP interface, or ISDN BRI connected to a voice GW. Another possibility is PRI, but that is more expensive.

Anyway in most cases it cheaper and easier to convert legacy phones to Cisco.

I have IPCMPR trunk card which can be configured as VoIP interface. Since I have never done this thing before so just checking if somebody in the forum has simple step by step instructions.

Thanks, BK

i had same requirment. i added panasonic kde100 as h323 gateway in cucm and it works fine

Create
Recognize Your Peers
Content for Community-Ad