06-06-2023 06:35 AM
Hi,
Wanted to see if there's a web based tool that with the phones mac address show what version they're running.
Thanks
Solved! Go to Solution.
06-06-2023 06:50 AM
Hello erodriguez@iqteksolutions.com,
As I know, there is no specific web-based tool provided by Cisco that allows you to determine the software version of Cisco IP phones based on their MAC addresses.
The software version of a Cisco IP phone can typically be obtained through the administration interfaces of the call control system you are using, such as (CUCM) or CME. These interfaces provide information about the registered devices, including their software versions.
06-06-2023 06:50 AM
Hello erodriguez@iqteksolutions.com,
As I know, there is no specific web-based tool provided by Cisco that allows you to determine the software version of Cisco IP phones based on their MAC addresses.
The software version of a Cisco IP phone can typically be obtained through the administration interfaces of the call control system you are using, such as (CUCM) or CME. These interfaces provide information about the registered devices, including their software versions.
06-06-2023 06:56 AM
Yes I know that this can be obtain on the CUCM, but I asked because a site just sent the MAC's. Thanks for your response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide