PLAR configuration Issue

[Nikunj Shah]

Hi All,

Please help me to solve PLAR issue.

There are two phones and both are in different Cluster. 

Extension number 1000 is configured on Cluster 2 and Extension 2000 is configured on Cluster 1.

I have configured PLAR in such a way that once extension 1000 goes off hook phone will automatically dial extension 2000.

Below are the configuration.

• Partition Configuration For null TP.

Partition

PLAR1_PT

• CSS configured for Phone and TP.

	CSS	Selected PT
Assigned to Line	PLAR1_LINE_CSS	PLAR1_PT
Assigned to TP	PLAR1_TP_CSS	Cluster-1-PT

• Cisco 7841 configuration.

Phone Config	Ext. 1000
Line Partition	ABC-PT
Line CSS	PLAR1_LINE_CSS
SIP Dial Rule	PLAR_2000

• This is a SIP phone so i have created SIP Dial rule.

SIP Dial Rule	Dial Pattern	Dial Parameter	Value
PLAR_2000	7940_7960_OTHER	Pattern	2000

• Null Translation Pattern configured as

Translation Pattren	" NULL"
Called Party Transform Mask	2000
Partition	PLAR1_PT
CSS	PLAR1_TP_CSS

• Route pattern configuration which is pointing to Cluster 1.

Pattern	Description	Partition	Associated Device
2000	Pointing to Cluster 1	Cluster-1-PT	Cluster-1-RLT

(Note: I can call to extension 2000 from NON PLAR phone.)

[Andrew West]

I might have missed it in there but what is the actual problem you are having? 

[Nikunj Shah]

When extension 1000 goes off hook phone is not auto dialing (I can here Dial-ton) .

I have also checked by changing Line CSS ( added RP's PT on Line css)  for testing.

by changing Line css, I can dial 2000 number manually.

[Chris Deren]

Is the "PLAR1_LINE_CSS" assigned to the DN or device?

It needs to be assigned to Device and not DN for SIP PLAR to work. 

[Nikunj Shah]

Hi Crish,

Yes, same css has been assign to device and line.

But it will select line css 1st as line css has high priority.

[Chris Deren]

Leave it only on the device.

Post screen shot of your dial rule.

[Nikunj Shah]

Okay

So for Line which CSS need to select.. the css which has PT of RP??

Please find below screen shot of dial rule

[Chris Deren · Accepted solution]

No CSS on DN, just CSS on device.

Your SIP dial rule should only have one statement with value 2000, make sure you pressed the PLAR button when you added it.

[Nikunj Shah]

Hi Chris,

PLAR is working now.

Thanks.

[Chris Deren]

Excellent, can you please mark the thread as answered and rate all useful posts?

[Yasoda Palachulla]

SIP Dial Rule not working for me too. 
configured Button 1 instead of pattern but not working.

any help 

[Yasoda Palachulla]

Device Model: 8861

[Yasoda Palachulla]

Worked please ignore this message