PLAR on ATA187

[Maciej Karpinski]

The Cisco ATA 187 Analog Telephone Adaptor Release Notes for Firmware Release 9.2(3) (SIP) states "

The 9.2(3) Firmware Release provides support for the One Touch Private Line Automatic Ringdown (PLAR) feature"

How do I configure this on the ATA187? Havn't been able to find any documentation.

[acampbell]

Hi,

What is the ATA 187 working with ?

CUCM etc

Regards

Alex

[Maciej Karpinski]

CUCM 8.6

[acampbell]

Hi,

Have a look at this link:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03sdial.html

I think you need to add a SIP dial rule and add as PLAR

Regards

Alex

[Maciej Karpinski]

Yes I need a SIP Dial Rule but I dont understand how to configure the rules so the phone attached to the ATA dials automatically as soon as it goes offhook.

I've added a PLAR SIP Dial Rule but I still need to press at least one digit before it dials.

[Maciej Karpinski]

PLAR works fine on the ATA187 now :-)

I remebered wrong how to set this up and created a translation pattern trat was translating ! to the number I wanted to dial instead och creating a blank translation pattern trat was translating to the number I wanted to call.

[Frank Wakelin]

Can you expand on the setup of the PLAR with the 187?

[cristian.munoz]

Hello

Could you give us the info about this???

TIA
Cristian.