06-11-2007 05:02 AM - edited 03-14-2019 09:59 PM
HI,
I just wanted to know, if the Power Over Ethernet (POE) is base on the IOS or is dependent on the hardware?? i have 3550 series Cisco Switches and wanted to know if i can enable POE over them???
Kindly Help me with your suggestion.
06-11-2007 05:14 AM
POE is hardware and software dependent, but any hardware with POE capabilities should be running IOS to support it.
Hope this helps. If so, please rate the post.
Brandon
06-11-2007 05:15 AM
Hi Michel,
The PoE functionality is primarily Hardware based. Have a look at the following list for the 3550, and note the ** for the PoE supported version;
The Cisco Catalyst 3550 Series Intelligent Ethernet Switches include the following configurations:
Catalyst 3550-24 Switch-24 10/100 ports and two Gigabit Interface Converter (GBIC)-based Gigabit Ethernet ports; 1 rack unit (RU)
**Catalyst 3550-24 PWR Switch-24 10/100 ports with integrated inline power and two GBIC-based Gigabit Ethernet ports; 1 RU
Catalyst 3550-24-DC Switch-24 10/100 ports and two GBIC-based Gigabit Ethernet ports; 1 RU; DC-powered
Catalyst 3550-24-FX Switch-24 100FX ports and two GBIC-based Gigabit Ethernet ports; 1 RU
Catalyst 3550-48 Switch-48 10/100 ports and two GBIC-based Gigabit Ethernet ports; 1 RU
Catalyst 3550-12G Switch-10 GBIC-based Gigabit Ethernet ports and two 10/100/1000BASE-T ports; 1.5 RU
Catalyst 3550-12T Switch-10 10/100/1000BASE-T ports and two GBIC-based Gigabit Ethernet ports; 1.5 RU
From this doc;
http://www.cisco.com/en/US/products/hw/switches/ps646/products_data_sheet09186a00800913d7.html
Hope this helps!
Rob
EDIT: Brandon, you are far too quick for this poor typist :)
06-11-2007 05:21 AM
Hey Thanks Guys...this was really helpfull
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide