ā03-03-2010 06:12 AM - edited ā03-15-2019 09:36 PM
Hi Guys,
I am trying configure Extension Mobility in the CallManager version 4.1.3 and I did all step, but, when I go select the service in IP Phone It stayed in Request for same times and donĀ“t connect and It return to option "Make Your Selection" in a one IP Phone 7940, another IP Phone 7940 appear the message "Host Not Found" and the another IP Phone 7912 appear the "Failed Connected". The IP Phone are registered by DHCP that is configured in Gateway 2801. I Did the review configuration in Cisco CallManager and didnĀ“t found the wrong configuration.
Any Suggestion to solve this problem?
Thanks,
Wilson Santana
ā03-03-2010 06:16 AM
Hi
Is the URL you set on the IP Phone Service using a host name or IP address?
If it is host name, then you need to ensure that your IP phones have DNS servers assigned, and that the DNS servers have the host name in them.
Typically on CM4 you would use the publisher's IP address.
Regards
Aaron
Please rate helpful posts...
ā03-03-2010 06:33 AM
HI Aaron,
The URL is configured by IP. I Did the step by step the procedure.
Thanks,
Wilson Santana
ā03-03-2010 06:59 AM
Hi Wilson,
Can you check Phone URL Service Parameter in Enterprise Service Parameter . You
should change it to IP address instead of Publisher's Hostname Name..
Thanks,
Nirmal
ā03-03-2010 07:12 AM
Hi,
I already did had this before, in the Enterprise Parameters I changed all names URL to IP address.
Thanks,
Wilson
ā03-03-2010 07:26 AM
OK - can you browse to the EM URL from your PC?
You can paste the URL into IE or Firefox and insert a phone device name like so (obviously insert your own phone device name and server IP)
http://192.168.0.80:8080/emapp/EMAppServlet?device=SEP123412341234
And you should get some XML back...
Regards
Aaron
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide