cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
354
Views
0
Helpful
2
Replies

Problems with Cisco phones 6941 on CME Cisco

A9191057992
Level 1
Level 1

Hello all.

I trying to configure CME on Cisco 2921 with IOS (C2900-UNIVERSALK9_NPE-M), Version 15.0(1)M5.

And i cant ctreate ephone with phone type 6941, i have only follow list of phones

 

(config-ephone)#type ?
  12SP    12SP+ and 30VIP phones
  7902    Cisco IP Phone 7902
  7905    Cisco IP Phone 7905
  7906    Cisco IP Phone 7906
  7910    Cisco IP Phone 7910
  7911    Cisco IP Phone 7911
  7912    Cisco IP Phone 7912
  7920    Cisco IP Phone 7920
  7921    Cisco IP Phone 7921
  7925    Cisco IP Phone 7925
  7931    Cisco IP Phone 7931
  7935    Cisco IP Conference Station 7935
  7936    Cisco IP Phone 7936
  7937    Cisco IP Conference Station 7937
  7940    Cisco IP Phone 7940
  7941    Cisco IP Phone 7941
  7941GE  Cisco IP Phone 7941GE
  7942    Cisco IP Phone 7942
  7945    Cisco IP Phone 7945
  7960    Cisco IP Phone 7960
  7961    Cisco IP Phone 7961
  7961GE  Cisco IP Phone 7961GE
  7962    Cisco IP Phone 7962
  7965    Cisco IP Phone 7965
  7970    Cisco IP Phone 7970
  7971    Cisco IP Phone 7971
  7975    Cisco IP Phone 7975
  7985    Cisco IP Phone 7985
  CIPC    Cisco IP Communicator
  anl     SCCP Gateway (AN)
  ata     ATA  phone emulation for analog phone
  bri     SCCP Gateway (BR)

the mos phones in the office it`s 6941. early i didnt have problems with this phones. i have 26 CME and all of this routers worki normale with this typy of phone.

Somebody know what is it?

thanks

 

1 Accepted Solution

Accepted Solutions

Gregory Brunn
Spotlight
Spotlight

I suggest you check the CME compatibility matrix.  Your IOS version probably doesn't support the CME version that would support the 6941 phones.  Looks like you might have been typing quickly, but if you have 26 CME routers and they are all working normally besides this one, I suggest maybe you check the IOS version the other other routers are running.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html

 

Hope this helps let me know.

View solution in original post

2 Replies 2

Gregory Brunn
Spotlight
Spotlight

I suggest you check the CME compatibility matrix.  Your IOS version probably doesn't support the CME version that would support the 6941 phones.  Looks like you might have been typing quickly, but if you have 26 CME routers and they are all working normally besides this one, I suggest maybe you check the IOS version the other other routers are running.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html

 

Hope this helps let me know.

Thanks for help Gregory.

 

The problem was with IOS version. I update it to 15.2.4 and after that everythink ok.

 

Best Regards