Hey Guys,
I am hoping i can get some guidance on this subject, maybe the best way to approach it. I have Site A (Main Site) with BE6Ks, This site is home to the PRI for the main site and the other remote sites (3) connected over a LAN extensions within the same city, I have 1 remote site (Site B) that is about 2 hours away. This site has a 2901 Router with a 2 Port FXO card. My goal is to set this up so that all external local calls at Site B go out through the 2 Port FXO card and that any external inbound calls to Site B are received to the Users at Site B directly to there Phones, This is not an SRST Router. Strictly to be used for outbound and inbound external calls in and around the area of the remote site. I am thinking i need to setup a SIP trunk between Site B and Site A so that I can control what happens with these calls. I would appreciate any input on this, I am familiar with a Single site setup for both BE6Ks and BE6K scenarios, this is the first installation where I have remote site that needs external inbound and outbound use for local calls to that area. I appreciate all comments. Thansk in advance.
Mike
