04-17-2013 12:38 AM - edited 03-16-2019 04:50 PM
How can I block an outgoing call to a number like 118118 or if users dial 9 118118.
I have tried all the alternatives with translation reject, no port number in the dial-peer but still the call seems to go out.
04-17-2013 01:13 AM
Hi Mohamed.
To achieve this you can use cor list.
Have have a look to this doc
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml
HTH
Regards
Carlo
Please rate all helpful posts
04-17-2013 08:01 AM
Carlo,
Any other alternative. Since I dont want to use COR at the moment
04-17-2013 08:50 AM
Hello,
You can use after-hours block pattern under telephony-service.
Hope to help, please remember to rate if it does.
Kind regards,
- Adrian.
04-17-2013 09:17 AM
Refer
https://supportforums.cisco.com/thread/2020843
instead of incoming translation profile as depicted here, use outgoing
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide