06-26-2011 05:12 AM - edited 03-16-2019 05:37 AM
Hi all,
I have MGCP GW, registered with CUCM 8.5, the gatway has 3 fxo they are grouped with one Route Group, this route group is member of route list, when I try to make a call from this route list, the call always go through one fxo port 0/2/2, and never go with the other ports.
debug MGCP errors :
Jun 26 10:48:11.213: //-1/9EB9F8918041/MGCP|aaln/S0/SU2/2|-1|-1/<VOICE>/mgcp_trans_kpstseq_to_anidnis(218):[lvl=0]Going to traverse the Sig event list
Jun 26 10:48:11.213: //-1/9EB9F8918041/MGCP|aaln/S0/SU2/2|-1|-1/<VOICE>/mgcp_trans_kpstseq_to_anidnis(218):[lvl=0]Going to traverse the Sig event list
Jun 26 10:48:11.213: //-1/9EB9F8918041/MGCP|aaln/S0/SU2/2|-1|-1/<VOICE>/mgcp_trans_kpstseq_to_anidnis(218):[lvl=0]Going to traverse the Sig event list
Jun 26 10:48:15.849: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x48045390 pkt->mgcp_parm_lines 0x00000000)
Jun 26 10:48:15.853: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x48045390 pkt->mgcp_parm_lines 0x00000000)
Jun 26 10:48:15.857: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x48045390 pkt->mgcp_parm_lines 0x00000000)
Jun 26 10:48:43.946: //-1/xxxxxxxxxxxx/MGCP|aaln/S0/SU2/2|-1|-1/mgcp_allocate_if(8232):[lvl=2]ccAllocateIF failed rc -6 vdbptr 0x47AE8A94 alloc_vdbptr 0x0
Jun 26 10:48:43.946: Following traceback is for INFO ONLY. -Traceback= 0x40CDF690 0x40D08070 0x40CAEE4C 0x40CE129C 0x40CE0C30 0x40C9F454 0x40C9F654 0x40CA0334 0x40CA09A8 0x40CA0CA0 0x40CA0E88 0x40CA2894
Jun 26 10:48:44.962: //-1/xxxxxxxxxxxx/MGCP|aaln/S0/SU2/2|-1|-1/mgcp_allocate_if(8232):[lvl=2]ccAllocateIF failed rc -6 vdbptr 0x47AE8A94 alloc_vdbptr 0x0
Jun 26 10:48:44.966: Following traceback is for INFO ONLY. -Traceback= 0x40CDF690 0x40D08070 0x40CAEE4C 0x40CE129C 0x40CE0C30 0x40C9F454 0x40C9F654 0x40CA0334 0x40CA09A8 0x40CA0CA0 0x40CA0E88 0x40CA2894
I also see this error
Error on Voice Gateway FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally
the show voice dsp group all slot 0 :
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 4
Voice channels allocated: 0
Credits used: 0
Another thing worth to mention is that: When I put each individual fxo in an individual rout group I can make 2 calls simultaneity
the sh run, sh diag, sh version is attached
any Idea?
Thnaks
Ahmad
06-26-2011 11:19 PM
Ahmad,
Is it the same symptoms if you activate the SRST ? i mean if you disconnect the link and the branch became on the SRST mode , how many calls can you make ?
Amer
06-26-2011 11:29 PM
Hi Amer,
Let me check to answe you.
Ahmad
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: