Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
So I have two SIP trunks (going to two Derdack Enterprise Alert Managers) that are part of a Route Group. It seems when the VoIP Service is turned-down (testing fail-over), CUCM doesn't declare the trunk down for 60 seconds. I looked through the CUCM...
HelloDo we need a specific IOS Version for Enabling a Phone to use Extension Mobility in CallManager Express, currently I got CME running on V 4.1i noticed "voice user-profile 1" command not working with my CME IOS versionThanksST
I´m upgrading a callmanager from 4.3 to 7.1.(3), but when i run the DMA tool the results are Export - Successful. Validation - Failed. and the error log shows this information:***> DATA PROCESSING TESTS REVEALED AN ISSUE WHICH GENERATED THE FOLLOWING...
Hi,I have a situation, where I send subscriber calls to an external PBX (for enhanced routing) and need to have a fallback to route calls tolocal subscribers, if the external pbx fails.The only way I could do this was with a RouteList / Routegroup, a...
We have someone that has a 7965 phone with an Auxiliary port that's being used by a sidecar module.That precludes the use of that port for switchhook control by a wireless headset. We use Plantronics headsets.Anyone know of a solution to this proble...
HelloI am fresh on Voice, deployed CME on 2851 Router. I am unable to register cisco phones, Other SIP phones where succcessfully registered. DHCP is running on Windows 2008 Server. ephone-dn 10 dual-linenumber 6100label CiscoPhonename demo_cisco_p...
Hi to all,Does anyone know a sip client for Nokia to register with CUCME 8.0?I got a nokia e5 and e72. Firstly i tried to make them work with intellsync but no succeed. So i was wondering to try it with any sip client.thanks for your help.ByeI
Hi,We have around 8 users who has 2 IP phones and when they call out they need to display only one number. Eg. User 1 : Having DN as 6191 and 6192, his global identification number is 6191, hence when he calls any mobile number the number to be displ...
Can we make calls between two H323 enabled gateways via WAN without any call manager? I have H323 enabled gateway in Site A which has T1 links connected to local service provider and another H323 enabled gateway at Site B having T1 links connected to...
Hi There,I have four offices that are using cisco IPT, gateway H323, CUCM8, this offices call each other over the WAN.The issue that i'm having with one of the office is that when it calls other offices over the WAN, calls break in between when they ...
sure we got the configuration for the 9971 but looks like it does not like the CME version 8.6 at all Some documents are talking about a special License to have this SIP IP phone register to the Call Manager Express the Admin Guide and Installation g...
hy all,Cisco generated an indication about the above vulnerability on June 01, 2011they mention :Cisco has released free software updates that address these vulnerabilities. There are no workarounds available to mitigate these vulnerabilities.bug ID:...
CUCM 7.x, I want to schedule an export of username,phone number from CUCM and automatically have it downloaded somewhere. I can do the export, but how would I go about the auto download, without having to go through the webpage?Or how else to go abou...
Dear Team Cisco !I have case study below:My Customer want to change ring tone watting to music file or file report audio... Ex: My Customer call to Call Center ( 1900xxxx) -> Tranfer to Extension, while waiting for Extension answer...My customer list...
We have our service desk set-up in a hunt group with 74455 as the hunt pilot. We also have a voicemail account in unity on Ext 74455. We no longer have a physical phone for ext 74455 but we are wanting to have a light or similar that lets the service...
