cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
453
Views
0
Helpful
1
Replies

Route Pattern for SIP SCCP

Aleksenko Rustam
Beginner
Beginner

Hi guys,

The question is that there is Route Pattern of such look, 9.810!
In it Discard Digits - PreDot is used
At dialing from CIPS 8.6 SCCP 981033XXXXXXXX the call goes to a trunk as 81033XXXXXXXX. - The call goes everything well!
And if to call on CIPS 8.6 SIP 981033XXXXXXXX
the call goes to a trunk as 9810. - And the operator says to me that such number does not exist.
Where can the problem be?

1 Accepted Solution

Accepted Solutions

Aleksenko Rustam
Beginner
Beginner

The problem was in translation pattern there it was specified 9810X! and no more operations with it were made!

View solution in original post

1 Reply 1

Aleksenko Rustam
Beginner
Beginner

The problem was in translation pattern there it was specified 9810X! and no more operations with it were made!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: