Router 2801 conference bridge

[gevangelista]

I've a cisco 2801 router equipped with 32 ds, but there isn't  any voice card interface.

To configure this device ad a conference-bridge, I need to have some voice interfasce card (bri  or PRI or T1) or not?

Thanks in advance

giancarlo          

[ronpatel]

Hi

You need only PVDM's to have Conf resources.

Regards

Ronak patel

Rate helpful posts.

[gevangelista]

ok thanks

the followìng config on router it's correct?

@ GW

GW_2801(config)#sccp local

GW_2801(config)#sccp ccm identifier 1 version 4.0

GW_2801(config)#sccp

GW_2801(config)#voice-card 0

GW_2801(config-voicecard)#dsp services dspfarm

GW_2801(config-voicecard)#exit

GW_2801(config)#dsp profile 1 conference

GW_2801(config-dspfarm-profile)#associate application sccp

GW_2801(config-dspfarm-profile)#maximum sessions 2

GW_2801(config-dspfarm-profile)#no shutdown

GW_2801(config-dspfarm-profile)#exit

GW_2801(config)#sccp ccm group 1

GW_2801(config-sccp-ccm)#associate ccm 1 priority 1

GW_2801(config-sccp-ccm)#associate profile 2 register CFB123456

GW_2801(config-sccp-ccm)#bind interface

GW_2801(config-sccp-ccm)#exit

GW_2801(config)#dspfarm

@ CallManager

Service >> Media Resource >> Conference Bridge

Add a New Conference Bridge

Conference Bridge Type : Cisco IOS Enahanced Conference Bridge

Conference Bridge Name : CFB123456

Device pool :

[Roger Kallberg]

No its not correct, you need to reference the same profile number in the association as you used when you create the CFB profile.

GW_2801(config-sccp-ccm)#associate profile 1 register CFB123456

Please all rate useful posts

Sent from Cisco Technical Support iPhone App