07-23-2008 08:58 AM - edited 03-15-2019 12:09 PM
Hi, good afternoon!
I need help to set up an ISDN - QSIG
On one side is 5.1 CCM 3725 with a router connected to a PBX Avaya via ISDN Qsig
I need to connect to the environment Cisco Avaya need to know if you can send the number and name on Caller ID
below the current configuration
interface Serial1 / 0:15
No IP address
encapsulation hdlc
logging in the event link-status
isdn switch-type primary-qsig
isdn overlap receiving T302-3000
isdn incoming Voice Voice -
isdn T310 60000
isdn bchan-number-order ascending
isdn sending-complete
No keepalive
No fair-queue
No enable CDP
It is possible, hedge someone tell me?
07-29-2008 08:11 AM
In CallManager after CM 3.3 , calling name display is supported via the Facility IE.
http://www.cisco.com/en/US/docs/ios/12_2/voice/configuration/guide/vvfisdn.html
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml
07-29-2008 08:26 AM
Yes,
It is possible. These are the features supported with QSIG.
Features Supported
CLIP-Calling Line (Number) Identification Presentation
CLIR-Calling Line (Number) Identification Restriction
© 2006 Cisco Systems, Inc. All right reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 4 of 100
CNIP-Calling Name Identification Presentation
CNIR-Calling Name Identification Restriction
COLP-Connected Line (Number) Identification Presentation
COLR- Connected Line (Number) Identification Restriction
CONP-Connected Name Identification Presentation
CONR- Connected Name Identification Restriction
Sending Alerting Name
CT-Call Transfer (by join)
CFU-Call Forwarding Unconditional (by join)
CFB-Call Forwarding Busy (by join)
CFNR-Call Forwarding No Reply (by join)
CFU-Call Forwarding Unconditional (by Reroute) - see Limitations Section
CFB-Call Forwarding Busy (by Reroute) - see Limitations Section
CFNR-Call Forwarding No Reply (by Reroute) - see Limitations Section
CCBS-Call Completion to Busy Subscriber - see Limitations Section
CCNR-Call Completion No Reply - see Limitations Section
ANF-PR-Additional Network Feature Path Replacement (for Call Transfer by join)
ANF-PR-Additional Network Feature Path Replacement (for Call Diversion by forward switching) - see Limitations Section
ANF-PR-Additional Network Feature Path Replacement (for Trombone connection)
MWI- Message Waiting Indication (lamp ON, lamp OFF)
Have alook at this document ans ee configuration for the callmanager side for QSIG.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide