01-30-2013 08:56 PM - edited 03-16-2019 03:27 PM
Dear friend.
I have some problem when setting up BRI Interface (2B+D) in Vietnam.
This is my configuration:
Configuration:
interface BRI0/1/0
no ip address
no ip route-cache
isdn switch-type basic-net3
isdn twait-disable
isdn tei-negotiation preserve
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
end
Show ISDN Status:
ISDN BRI0/1/0 interface
dsl 4, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = AWAITING_ESTABLISHMENT
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 4 CCBs = 0
The Free Channel Mask: 0x80000003
Debug ISDN Q921:
debug isdn q921
debug isdn q921 is ON.
Jan 31 04:38:23.695: ISDN BR0/1/0 Q921: L2_EstablishDataLink: sending SABME
Jan 31 04:38:23.695: ISDN BR0/1/0 Q921: User TX -> SABMEp sapi=0 tei=0
Jan 31 04:38:24.695: ISDN BR0/1/0 Q921: User TX -> SABMEp sapi=0 tei=0
Jan 31 04:38:25.695: ISDN BR0/1/0 Q921: User TX -> SABMEp sapi=0 tei=0
Jan 31 04:38:26.291: ISDN BR0/1/0 Q921: User RX <- IDCKRQ ri=0 ai=127
Jan 31 04:38:26.291: ISDN BR0/1/0 Q921: User TX -> IDCKRP ri=18285 ai=0
Jan 31 04:38:26.695: ISDN BR0/1/0 Q921: User TX -> SABMEp sapi=0 tei=0
Debug ISDN Q931:
Jan 31 04:47:39.707: ISDN BR0/1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
Jan 31 04:47:45.707: ISDN BR0/1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
Jan 31 04:47:51.707: ISDN BR0/1/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
Debug ISDN error interface BRI 0/1/0
Jan 31 04:52:26.607: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x3
Jan 31 04:52:26.611: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
Jan 31 04:52:27.631: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x3
Jan 31 04:52:27.631: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
Jan 31 04:52:27.707: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x
Jan 31 04:52:33.707: ISDN BR0/1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 63 tei 127 ces 0 ev 0x650
Jan 31 04:52:33.895: ISDN BR0/1/0 SERROR: service_queue_from_physical_layer: got ISDN_PH_ACT_IND on an active interface?
Please help me to solve this problem.
I can't make call to PSTN.
Thanks all my friends.
VinhPLT
Solved! Go to Solution.
01-31-2013 12:57 AM
Dear Paolo.
Thanks for your information.
I'll check it tommorrow.
Best Regards.
VinhPLT
01-31-2013 01:08 AM
But can you please tell me why BRI interface up when I connect both of device to NT1.
Regards.
VinhPLT
02-04-2013 01:14 AM
Dear friend.
The BRI interface has been up but I can't make call through it.
I have result with command debug ISDN when I make call:
Feb 4 09:09:52.871: ISDN BR0/1/1 EVENTd: isdn_get_guid: Got Guid 00115EE30C00
Feb 4 09:09:52.871: ISDN BR0/1/1 EVENT: process_bri_call: call id 0x8016, called_number 427, Guid 00115EE30C00 speed 0, call type VOICE, bchan -1 clng_num 700Received pdata len 0x3B data:1C 39 9E 1 0 3 67 74 64 0 0 0 2E 49 41 4D 2C D A 47 43 49 2C 30 30 31 31 35 65 65 33 35 33 31 38 66 31 31 30 30 63 30 30 63 30 30 31 30 61 65 38 34 38 32 38 D A D A
Feb 4 09:09:52.871: ISDN BR0/1/1 EVENTd: process_bri_call: No name in GTD
Feb 4 09:09:52.871: ISDN Se0/0/0:15 EVENTd: isdn_get_display_text_from_gtd: false ret
Feb 4 09:09:52.871: ISDN BR0/1/1 Q931: Applying typeplan for sw-type 0x17 is 0x0 0x0, Calling num 700
Feb 4 09:09:52.871: ISDN BR0/1/1 EVENTd: calltrkr_setup_received: isdn_info=721130452l, call_id=0x8016 ORIGINATE
Feb 4 09:09:52.871: ISDN BR0/1/1 EVENTd: calltrkr_setup_received: calltracker disabled
Feb 4 09:09:52.871: ISDN BR0/1/1 Q931: Sending SETUP callref = 0x0091 callID = 0x8016 switch = basic-qsig interface = User
Feb 4 09:09:52.871: ISDN BR0/1/1 Q931: TX -> SETUP pd = 8 callref = 0x0091
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, '700'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '427'
Plan:Unknown, Type:Unknown
Feb 4 09:09:58.871: ISDN BR0/1/1 Q931: TX -> SETUP pd = 8 callref = 0x0091
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, '700'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '427'
Plan:Unknown, Type:Unknown
Feb 4 09:10:04.871: ISDN BR0/1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0091
Cause i = 0x80E6 - Recovery on timer expiry
Feb 4 09:10:04.871: ISDN EVENTd: cc_clear_free_list freeing 0x2AF92C28
Feb 4 09:10:04.871: ISDN BR0/1/1 EVENT: process_rxstate: ces/callid 1/0x8016 calltype 2 HOST_DISCONNECT_ACK
Feb 4 09:10:04.871: ISDN BR0/1/1 EVENTd: process_rxstate: cause=0x66 (102), cause_present=1
Feb 4 09:10:04.871: ISDN BR0/1/1 EVENTd: calltrkr_call_cleared: isdn_info=0x2AFB93D4, call_id=0x8016
Feb 4 09:10:04.871: ISDN BR0/1/1 EVENTd: calltrkr_call_cleared: hndl=0, cause=102, Recovery on timer expiry
Feb 4 09:10:04.871: ISDN CDAPI: cdapi_find_tsm found a GTD message RLC,
PRN,isdn*,,,
Do you have any idea?
02-04-2013 01:25 AM
Are you trying to call 427 from Cisco to PBX ?
If so that is not the right configuration.
02-04-2013 01:30 AM
Hi Paolo.
That's right.
This is my configure.
Can you help me to check it
!
boot-start-marker
boot-end-marker
!
!
card type e1 0 0
logging buffered 51200 warnings
!
no aaa new-model
network-clock-participate wic 0
network-clock-participate wic 1
!
no ipv6 cef
ip source-route
ip cef
!
!
!
!
!
ip domain name yourdomain.com
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-net5
!
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-2109617910
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2109617910
revocation-check none
rsakeypair TP-self-signed-2109617910
!
!
voice-card 0
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
sip
!
voice class h323 1
h225 timeout tcp establish 3
!
!
!
!
!
license udi pid CISCO2911/K9 sn FGL1650115F
hw-module pvdm 0/0
!
!
!
username cisco privilege 15 secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY
!
redundancy
!
!
controller E1 0/0/0
pri-group timeslots 1-31
!
controller E1 0/0/1
pri-group timeslots 1-2,16
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 172.28.90.60 255.255.255.0
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 10.232.72.39 255.255.255.0
ip virtual-reassembly in
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.232.72.39
!
interface GigabitEthernet0/2
description $ES_LAN$
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0:15
no ip address
ip flow ingress
ip flow egress
encapsulation hdlc
isdn switch-type primary-net5
isdn timer T310 1000
isdn overlap-receiving T302 3000
isdn incoming-voice modem
isdn T309-enable
isdn send-alerting
isdn bchan-number-order ascending
isdn outgoing-voice info-transfer-capability 3.1kHz-audio
isdn incoming ie redirecting-selection first
no cdp enable
!
interface Serial0/0/1:15
no ip address
ip flow ingress
ip flow egress
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
no cdp enable
!
interface BRI0/1/0
no ip address
no ip route-cache
isdn switch-type basic-net3
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn static-tei 0
isdn skipsend-idverify
!
interface BRI0/1/1
no ip address
isdn switch-type basic-qsig
isdn timer T310 400000
isdn overlap-receiving
isdn twait-disable
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
isdn skipsend-idverify
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip route 0.0.0.0 0.0.0.0 10.232.72.254
!
access-list 23 permit any
!
!
!
control-plane
!
!
voice-port 0/0/0:15
connection plar 713
!
voice-port 0/1/0
compand-type a-law
!
voice-port 0/1/1
!
voice-port 0/0/1:15
!
!
!
mgcp profile default
!
!
dial-peer voice 700 voip
description *****Dial-peer to CRM*****
destination-pattern 7..
session target ipv4:10.232.72.31
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 1 pots
destination-pattern 01.........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 3 pots
destination-pattern [2-7].......
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 4 pots
destination-pattern 0[2-7]........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 5 pots
destination-pattern 0[2-7].........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 300 pots
destination-pattern 3..
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 600 pots
destination-pattern 6..
direct-inward-dial
port 0/1/1
forward-digits all
!
dial-peer voice 2 pots
destination-pattern 0983995012
direct-inward-dial
port 0/1/1
forward-digits all
!
dial-peer voice 154 pots
destination-pattern 427
direct-inward-dial
port 0/1/1
forward-digits all
!
!
!
!
gatekeeper
shutdown
!
!
!
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
end
BR,
VinhPLT
02-04-2013 01:32 AM
Hi Paolo.
That's right.
This is my configure.
Can you help me to check it
!
boot-start-marker
boot-end-marker
!
!
card type e1 0 0
logging buffered 51200 warnings
!
no aaa new-model
network-clock-participate wic 0
network-clock-participate wic 1
!
no ipv6 cef
ip source-route
ip cef
!
!
!
!
!
ip domain name yourdomain.com
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-net5
!
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-2109617910
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2109617910
revocation-check none
rsakeypair TP-self-signed-2109617910
!
!
voice-card 0
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
sip
!
voice class h323 1
h225 timeout tcp establish 3
!
!
!
!
!
license udi pid CISCO2911/K9 sn FGL1650115F
hw-module pvdm 0/0
!
!
!
username cisco privilege 15 secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY
!
redundancy
!
!
controller E1 0/0/0
pri-group timeslots 1-31
!
controller E1 0/0/1
pri-group timeslots 1-2,16
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 172.28.90.60 255.255.255.0
ip virtual-reassembly in
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 10.232.72.39 255.255.255.0
ip virtual-reassembly in
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.232.72.39
!
interface GigabitEthernet0/2
description $ES_LAN$
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0:15
no ip address
ip flow ingress
ip flow egress
encapsulation hdlc
isdn switch-type primary-net5
isdn timer T310 1000
isdn overlap-receiving T302 3000
isdn incoming-voice modem
isdn T309-enable
isdn send-alerting
isdn bchan-number-order ascending
isdn outgoing-voice info-transfer-capability 3.1kHz-audio
isdn incoming ie redirecting-selection first
no cdp enable
!
interface Serial0/0/1:15
no ip address
ip flow ingress
ip flow egress
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
no cdp enable
!
interface BRI0/1/0
no ip address
no ip route-cache
isdn switch-type basic-net3
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn static-tei 0
isdn skipsend-idverify
!
interface BRI0/1/1
no ip address
isdn switch-type basic-qsig
isdn timer T310 400000
isdn overlap-receiving
isdn twait-disable
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
isdn skipsend-idverify
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip route 0.0.0.0 0.0.0.0 10.232.72.254
!
access-list 23 permit any
!
!
!
control-plane
!
!
voice-port 0/0/0:15
connection plar 713
!
voice-port 0/1/0
compand-type a-law
!
voice-port 0/1/1
!
voice-port 0/0/1:15
!
!
!
mgcp profile default
!
!
dial-peer voice 700 voip
description *****Dial-peer to CRM*****
destination-pattern 7..
session target ipv4:10.232.72.31
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 1 pots
destination-pattern 01.........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 3 pots
destination-pattern [2-7].......
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 4 pots
destination-pattern 0[2-7]........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 5 pots
destination-pattern 0[2-7].........
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 300 pots
destination-pattern 3..
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 600 pots
destination-pattern 6..
direct-inward-dial
port 0/1/1
forward-digits all
!
dial-peer voice 2 pots
destination-pattern 0983995012
direct-inward-dial
port 0/1/1
forward-digits all
!
dial-peer voice 154 pots
destination-pattern 427
direct-inward-dial
port 0/1/1
forward-digits all
!
!
!
!
gatekeeper
shutdown
!
!
!
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
end
BR,
VinhPLT
02-04-2013 01:37 AM
To connect router to PBX, make a crossed cable and network-side configuration.
There are many posts about about.
As I said before, you will loose much time in trying to do yourself, hire a reputable consulant or person with expereince.
02-04-2013 01:41 AM
BRI Interface is up!
ISDN BRI0/1/1 interface
dsl 5, interface ISDN Switchtype = basic-qsig
**** Slave side configuration ****
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 5 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
I must do it by myself.
BR.
VinhPLT
02-04-2013 01:36 AM
Debug ISDN when I call from 427(PBX) to 700(PBX)
Feb 4 09:31:57.751: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x01
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Exclusive, B2
Facility i = 0x91AA068001008201008B0100A10E02021B2506042B0C092903020780
Facility i = 0x91AA068001008201008B0102A11402021B2602013B300B30090A01050A01040A0103
Facility i = 0x91AA068001008201008B0100A10C02021B2706042B0C09008400
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0183, '427'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '700'
Plan:Unknown, Type:Unknown
Locking Shift to Codeset 5
Codeset 5 IE 0x32 i = 0x81
Feb 4 09:32:01.687: ISDN BR0/1/1 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
Cause i = 0x81E6 - Recovery on timer expiry
Feb 4 09:32:01.763: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x01
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Exclusive, B2
Facility i = 0x91AA068001008201008B0100A10E02021B2506042B0C092903020780
Facility i = 0x91AA068001008201008B0102A11402021B2D02013B300B30090A01050A01040A0103
Facility i = 0x91AA068001008201008B0100A10C02021B2E06042B0C09008400
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0183, '427'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '700'
Plan:Unknown, Type:Unknown
Locking Shift to Codeset 5
Codeset 5 IE 0x32 i = 0x81
Feb 4 09:32:05.699: ISDN BR0/1/1 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x01
Cause i = 0x81E6 - Recovery on timer expiry
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide