09-30-2013 01:41 AM - edited 03-16-2019 07:36 PM
Hi,
i have configured a shared line on two 9971 phones. (CUCM9.1) An incomming call is taken bei one of this phones. Now I will transfer this call to the other phone. Press "Transfer" , "Speed Dial" the other Phone and get the busy tone. What is wrong here? Or is it a better way to reach my goal ? The "
Thanx for help, Steffen
Solved! Go to Solution.
09-30-2013 02:20 AM
Hi Steffen.
If you want to transfer an active call to another phone with the same directory number, the busy trigger sohuld be set to 3.
That's because the first call is active, the second call starts when you press transfer and when you dial the shared DN that would be the third call.
As alternative you can you call park wich allows your collegues to pick a parked call just dialing the park number.
HTH
Rehards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-30-2013 02:20 AM
Hi Steffen.
If you want to transfer an active call to another phone with the same directory number, the busy trigger sohuld be set to 3.
That's because the first call is active, the second call starts when you press transfer and when you dial the shared DN that would be the third call.
As alternative you can you call park wich allows your collegues to pick a parked call just dialing the park number.
HTH
Rehards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-30-2013 02:43 AM
Thanx Carlo !
This works so far. Because the transfered call ist again to the shared line,both phones ring again. Is it a way to aviod this?
And is it a key function like "Transfer Speed Dial" ?
The call park method was declined. To complicated for the Users. :-(
The scenario is a manager-assistant scenario, for your understanding.
Kind regards, Steffen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide