09-30-2013 09:41 PM - edited 03-16-2019 07:37 PM
Hi guys,
What does it mean to have "duplicate of primary", under Status, in "show ccm-manager"? And why should one configure the same call agent as a backup for itself?
09-30-2013 10:03 PM
Hi,
Can you share the running config of the gateway.
Need to check the following config
mgcp call agent X.X.X.X
ccm-manager redundant host X.X.X.X
ccm-manager config server X.X.X.X
Is there a repitition in any of the above IP addresses?
Manish
09-30-2013 11:25 PM
Hi
1st do "no mgcp" on your gateway ,to disable mgcp then apply the below commands
(conf)#mgcp call-agent x.x.x.x (where x.x.x.x is the IP address of your Subscriber).
(conf)#ccm-manager redundant-host x.x.x.x (where x.x.x.x the IP address of your Publisher).
(conf)# ccm-manager switchback immediate
(conf)#ccm-manager mgcp
(conf)#mgcp
That is all, then make sure on your ccm group list that your (subscriber is the 1st then your publisher) or based on your configuration.
Thank you
please rate all useful information
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide