Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HiI currently have my cucm integrated with AD- we use the UPN as the userID.is there any way to automatically append the domain name to the userID in the EM service so the users dont have to type it in
I observed when i perform 100 ping from my switch to ip phone, i will observe intermittent packet drop but this does not happen when i ping from a workstation to the ip phone. Is this normal or any misconfiguration in my switch?Below is the config fo...
We are trying to monitor the E1 channel utilisation on 3 Voice Gateways - CISCO3945-V/K9. Each Gateway has approximately 6 E1 connections.We are using the MIB CISCO-POP-MGMT-MIB detailed on this Cisco web page http://www.cisco.com/en/US/tech/tk648/tk...
I am having a problem integrating a AVAYA CS100 Release 5 and Cisco callmanager 8.5From a cisco phone We can make a SIP call , but we cannot receive a SIP call.I need to know is this normal to have URI like this?INVITE sip:7092;phone-context=cdp.udp...
Hi,a short question to upgrade.We have an CUCM 8.5 Cluster with Publisher and Subscriber and want to upgrade to 8.6.2Can I install the new software at both servers and then reboot the publisher first and after that the subscriber- or must I do the i...
Dear All i have this scenario Vonage model --> analog line -----> 2901 FXO port when i make call from my mobile to this DID 22279789 ----> transfer this number to 64 --> dial-peer 200 - 207 pots ---> open new session to make new call locally or inte...
Hi,can you help with following task? On phone with internal DN 6370, all calls are forwarded to external number , on mobile.What I want, is, when I call from internal phone device, with say DN 6372, to 6370. That on mobile I will see the number 6372....
Hi,I'm trying to restrict Corporate Directory access for a few phones that are located in public zones (LAN or VPN)On old models like 7975G it was possible putting a dummy IP address (http://127.0.0.1/ccmcip/xmldirectory.jsp) on the Device External D...
Hi,How we can check voice latency of Cisco ip phones 7912 / 7960.Plz see given below scenerio;At Location A, Cisco call Manager and one ip phone placed At Location B, only one ip phone is therethen what will be the testing process of voice Latency fr...
Dear All,I am facing a problem in cisco 7937. Rightnow my phone is working on DHCP but i want to give static IP on that. but when i press option button one application menu opens with the options1. Messeges2. Setting3. Servcies.when i select the opti...
Hello,We are experiencing numerous but hazardous PC network outages when they are connected behind a Cisco 8945 phone with Auto network settings.We are linked like this :Catalyst 2960S -------- IP Phone 8945 -------- PC Settings...
So I need to add a 9 or 91 (depending on local or long distance) to outbound calls when someone tries to return a call using missed, redial, received directory from the phone, CUPC, etc. I was going to follow the instructions noted here:http://www.c...
Greetings! Periodically CM SS on ip ivr goes in partial service. I gathered MIVR logs and found out that there is one port (DN 7804) which locked by unknown reason. Strings from log:2190330: Oct 04 11:37:31.357 MSD %MIVR-SS_TEL-2-DEADLOCK_DETECTED:Po...
Hello All,I am in the process of performing a P2V upgrade from CUCM 8.5 to CUCM 9.1.We will be keeping the same IP address and Hostname on the new cluster.Do I still need to follow the procedure for Migrating IP Phones Between Clusters with CUCM 8 an...
Hello,"bind media source-interface" is not configured under "voice service voip" so CME chooses local SIP media interface based on route to particular endpoint. This works correctly with CUCM and Asterisk.While configuring SIP trunk media bypass wit...
