signaling with dial peer voip

[Peter Fiers]

Hi,

what signaling protocol is used between the voice gateways if I configure a dial peer like this:

dial-peer voice 10 voip

destination-pattern 91200....

session target ipv4:172.16.5.2

Thank you.

Peter

[Brandon Buffin]

Peter,

This would be an H.323 call.

Hope this helps.

Brandon

[Peter Fiers]

Hi Brandon,

thank you for answering that quickly. Could you recommend a Cisco document on H.323 security pointing to something like "How to secure H.323 communication over the Internet"?

Thank you.

Peter

[Brandon Buffin]

Peter,

The following link discusses securing H.323 media and signaling.

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htsecure.html

Hope this helps.

Brandon

[Peter Fiers]

Hi Brandon,

many thanks for the info.

Peter