SIP Status: 404 Not Found

[Joao Wiens]

I have the followin cenario:

SIP Client ----- Asterisk ---- Opensips ---- CUCM ---- CIPC.

The call goes from CIPC to the CIP Client, but on the opposite way I got the message:

80.488858  10.128.0.10 -> 10.124.2.35  SIP/SDP Request: INVITE sip:3940@10.128.0.10:5070<mailto:sip:3940@10.128.0.10:5070>, with session description

80.491699  10.124.2.35 -> 10.128.0.10  SIP Status: 100 Trying

80.494729  10.124.2.35 -> 10.128.0.10  SIP Status: 404 Not Found

80.495086  10.128.0.10 -> 10.124.2.35  SIP Request: ACK sip:3940@10.128.0.10:5070<mailto:sip:3940@10.128.0.10:5070>

80.495176  10.128.0.10 -> 10.128.0.12  SIP Status: 404 Not Found

80.495259  10.128.0.12 -> 10.128.0.10  SIP Request: ACK sip:3940@10.128.0.10:5070<mailto:sip:3940@10.128.0.10:5070>

Any clue?

[paolo bevilacqua]

404 not found = some configuration is wrong and the number is unknow.

[paolo bevilacqua]

Is there any way to set an internal route, pointing to the DN's?

There are various settings that are needed, if you are not expereinced and certfied to work with CM, you can give the job to a reputable consultant, or UC certified Cisco partner.