cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
759
Views
0
Helpful
2
Replies

SIP trunk configuring problem

paramesh
Level 1
Level 1

hi all ....

we have Cisco cme 3900 series

we are trying to config the sip trunk from zain . but that sip registration is always rejecting from zain system. we contact to zain but they are all so not perfect to guide us what was the problem

i can ping there IP address but when we sending registration request its not reaching on zain sip server

 

so anybody have experience zain sip configuration

am attache my config also

please help us

2 Replies 2

Dennis Mink
VIP Alumni
VIP Alumni

you are not getting a response back from them on your register request,

 

i can also see a DNS lookup failure for 

ims.mnc004.mcc420.3gppnetwork.org

have you got the correct host name?  are they seeing your register requests?

 

Please remember to rate useful posts, by clicking on the stars below.

hi

the service provide give us the ip address of that dns sip server we configure that but no connection

we ask the ISP they can see our request they say no but they saying that dns ip and what are they give details are correct

i don't know where is the  issue  .  this is they provide details 

 

Site no.IPBBTechnology CoreTechnology CoreTechnology CoreTechnology Core
Static IP on CPE's WAN interface
(for MW Connectivity)
UsernamePasswordPBX is connected to (RYD IMS) or (JED IMS)
- Based on Customer site location
IMS IP(s) that PBX
 needs to reach
110.183.223.549.66135E+11m36565163RY(active) JD(secondary)Active SIG: 10.106.3.234Seconday SIG :10.106.19.234
2    Active Med:10.106.3.218
10.106.3.219
10.106.3.220
10.106.3.221
10.106.3.222
Secondary Med 10.106.33.218
10.106.33.219
10.106.33.220
10.106.33.221
10.106.33.222
       
 192.168.1.2   Lan ip      
 192.168.1.1  gateway