cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
733
Views
0
Helpful
2
Replies

Sip trunk for inbound calls

Thiago Cella
Level 1
Level 1

I´ve never did this kind of config, the provider pass to me these informations :

alias : 148XX

number :3777-XXXX

I have to do a simple dial-peer, or i have to configure a voice translate too?

Tks

1 Accepted Solution

Accepted Solutions

Felipe Garrido
Cisco Employee
Cisco Employee

Thiago,

Did the SP provide any additional information? What do they mean by the term alias? What's the relationship between 148xx and 3777-xxxx in their dial-plan/numbering-scheme? How do those numbers relate to the internal dial-plan and number-scheme for extension onsite?

-Felipe

View solution in original post

2 Replies 2

Felipe Garrido
Cisco Employee
Cisco Employee

Thiago,

Did the SP provide any additional information? What do they mean by the term alias? What's the relationship between 148xx and 3777-xxxx in their dial-plan/numbering-scheme? How do those numbers relate to the internal dial-plan and number-scheme for extension onsite?

-Felipe

Hi Felipe,

Now its working, the provider calls custumer ID by Alias,  and the 3777-xxxx is the telephony number , follow the config that works:

dial-peer voice 2001 voip
  description **Incoming Call from SIP Trunk**
  translation-profile incoming AutoAttendant
  destination-pattern 3901
  voice-class sip dtmf-relay force rtp-nte
  session protocol sipv2
  session target ipv4:10.1.10.2
  incoming called-number .%
  dtmf-relay rtp-nte sip-notify
  codec g711ulaw
  clid network-number XXXX11148XX



voice translation-rule 1
  rule 1 /.*/ /3901/
!
!
voice translation-profile AutoAttendant
  translate called 1