10-24-2017 02:53 PM - edited 03-17-2019 11:28 AM
Hi I will be configuring a SIP Trunk to our local Provider British Telecom (BT)
Does anyone have an example SIP ITSP configuration I could have a look at to the SIP provider from CUBE's stand point, because all I have been given is a public IP address and been informed not to enable SIP ALG from the customer or provider, surely I need more information such as the below.
sip-ua
authentication username ????? password ?????
credentials username ????? password ?????
realm zzzz.zzzz.co.uk
retry invite 2
registrar dns:zzzz.zzzz.co.uk expires 120
sip-server dns:zzzz.zzzz.co.uk
Thank you!
Solved! Go to Solution.
10-24-2017 05:16 PM
This is what I typically reference but I don't see BT on the list. Never hurts to ask them if they have done any interop testing and have their recommended configs as a starting point.
10-24-2017 05:16 PM
This is what I typically reference but I don't see BT on the list. Never hurts to ask them if they have done any interop testing and have their recommended configs as a starting point.
10-25-2017 02:05 AM
Thanks for this will reach out to the provider today and let you know how I got on tomorrow.
Appreciate all these links Greg.
Either way will let you know tomorrow.
Cheers!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide