ā03-30-2012 09:52 AM - edited ā03-16-2019 10:23 AM
I wan to upgrade my CUCM from 8.6.1.20000-1 to 8.6.2.20000-2.
My question is Could be able to just upgrade the CUCM and not the UNITY Connection?
Im planning to the Unity upgrade later.
any recommendation will be great
thanks
Solved! Go to Solution.
ā03-30-2012 09:54 AM
Yes, you can. I presume your CUC is also 8.6.
HTH
GP.
Pls rate helpful posts by clicking on the stars below the post !!
ā03-30-2012 09:57 AM
Depends, if you're talking about a CUCMBE 5K the answer is no, you upgrade the whole system.
If they're standalone installs, then yes.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
ā03-30-2012 10:03 AM
CUCM 8.6.2 is compatible with CUEAC/CUBAC 8.6.2.11. Refer page 12 of following release notes
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUBDAC_Rel_Note8_6_2_11.pdf
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUEAC_Rel_Note8_6_2_11.pdf
HTH
GP.
Pls rate helpful posts !!
ā03-30-2012 09:54 AM
Yes, you can. I presume your CUC is also 8.6.
HTH
GP.
Pls rate helpful posts by clicking on the stars below the post !!
ā03-30-2012 09:57 AM
my unity Connection is
Version 8.6.1.20000-109
ā03-30-2012 09:58 AM
Could you provide the documentation that show the CUCM could be a higher version than the unity COnnection in my case
ā03-30-2012 10:08 AM
Sure, here all you need to ensure is the compatibility between CUCM & CUC version. Which is documented clearly here http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html#wp38791
CUCM & CUC compatibility is very simple.
GP.
Pls rate all helpful posts !!
ā03-30-2012 10:09 AM
thanks
ā03-30-2012 09:55 AM
The reason im doing this is because Im
Installing Call Manager version 8.6.2.20000-2 (to fix the CDR Database issue) but it breaks CUEAC "System Version: 8.6.1.9" (Administration Version: 8.6.1.158) |
what would be the version for the CUEAC and for the CUBAC client that works with the cucm
8.6.2.20000-2. that im looking to upgrade?
thanks once again!
ā03-30-2012 10:03 AM
CUCM 8.6.2 is compatible with CUEAC/CUBAC 8.6.2.11. Refer page 12 of following release notes
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUBDAC_Rel_Note8_6_2_11.pdf
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUEAC_Rel_Note8_6_2_11.pdf
HTH
GP.
Pls rate helpful posts !!
ā03-30-2012 09:57 AM
Depends, if you're talking about a CUCMBE 5K the answer is no, you upgrade the whole system.
If they're standalone installs, then yes.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
ā03-30-2012 10:00 AM
I got 1 CUCM and 1 Unity connection ( no clusters )
where can I see if the im running
CUCMBE 5K ?
ā03-30-2012 10:11 AM
Hi Alberto,
Cisco Unity Connection 2.x and Later
Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Cheers!
Rob
ā03-30-2012 10:12 AM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide