[SOLVED] CME 7.1 Local Directory

[Rafael Chavantes]

Does any one know how to enable the local directory on CME?

I have done the steps in the Instalation Guide, but no joy.

When i press the Directory button on the phone show

"Host not found"

Any clue?

[Priyadarshini B.T]

hi,

please check the below configuration are already present

Under telephony-service, add "service local-directory" command
 
Specify the "type 7941" under ephone ( or the phone type you are using, this is just an example )
 
Do a no create cnf-files, create cnf-files and reboot the phone.
 
and let me know how it goes.

[Rafael Chavantes]

Same problem

Host not found

[Priyadarshini B.T]

send me the output of "show run"

[Rafael Chavantes]

Follows the sh run

[Rafael Chavantes]

Follows the sh run

[Priyadarshini B.T]

hi Rafael,

Please configure the following in the telephony service:
directory {first-name-first | last-name-first} 
no service local-directory
no create cnf-files
create cnf-files
 
reset the phones

after this please refer the link below as some steps has been missingin the configuration,

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmedirs.html#wpmkr1011010

[Rafael Chavantes]

Solved the problem.

I configured a NTP server and put the

ip http command.

Problem solved.

Thanks  Priya for your support.

[Priyadarshini B.T]

i am glad the issue got resolved.

have a great day