02-16-2019 11:04 PM - edited 03-17-2019 02:07 PM
hello
i have in Route Partition : TU_Employees_P and TU_Managers_P
i always use TU_Employees_P when i try to call extension to another extension . i have extension were using in Route Partition tu_employees i have changed to tu_managers ... and i can get call
so what the issue .. when i use TU_Employees_P ?
so what i can do to make all route partion
02-17-2019 12:12 AM
02-17-2019 12:57 AM
Results Summary
Calling Party Information
Dialed Digits = 6753
Match Result = RouteThisPattern
Matched Pattern Information
Called Party Number = 6753
Time Zone = Asia/Riyadh
Call Classification = OnNet
InterDigit Timeout = NO
Device Override = Disabled
Outside Dial Tone = NO
Call Flow
TranslationPattern :Pattern=
External Phone Number Mask = NO
Calling Party Mask =
Prefix =
CallingLineId Presentation =
CallingName Presentation =
Calling Party Number = 6609
ConnectedLineId Presentation =
ConnectedName Presentation =
Called Party Mask =
Discard Digits Instruction =
Prefix =
Called Number =
Directory Number :DN= 6753
Forward All : DN = VoiceMail = No CSS =
Forward Busy
Forward No Answer
Forward No Coverage
Forward Unregistered
CFDF : DN = VoiceMail = No CSS =
Pickup Group Number =
Device Status = Registered
Device Name = SEP3CCE73ACF798
Ignore Presentation Indicators = Disabled
Logged Into Hunt Groups = Enabled
Alerting Name = Abeer Hassan
Dual Mode = Disabled
Do Not Disturb(DND)
Automated Alternate Routing (AAR)
Device Status = Registered
Device Name = SEP3CCE73AD0371
Ignore Presentation Indicators = Disabled
Logged Into Hunt Groups = Enabled
Alerting Name = Abeer Hassan
Dual Mode = Disabled
Do Not Disturb(DND)
Automated Alternate Routing (AAR)
Alternate Matches
Partition :Name= TU_Managers_P
Pattern = 6753
Pattern Type = Enterprise
CallManager Device Type = UserDevice
PatternPrecedenceLevel = PlDefault
PatternRouteClass = RouteClassDefault
Partition :Name= Huawei_PT
Pattern = 6XXX
Pattern Type = Enterprise
Call Classification = OffNet
CallManager Device Type = AccessDevice
PatternPrecedenceLevel = PlDefault
PatternRouteClass = RouteClassDefault
Partition :Name=
Pattern = 6753
Pattern Type = Enterprise
CallManager Device Type = UserDevice
PatternPrecedenceLevel = PlDefault
PatternRouteClass = RouteClassDefault
02-17-2019 03:14 PM
Might want to read this chapter of the SRND, particularly CSS and partitions, which are basic building blocks for CUCM call routing
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide