SPAN Destination Port w. Ingress Function

[torsten.brink]

Hi Community,

I'm actually tryihg to configure a SPAN Destination Port which is also able to send and receive Traffic for the host itself. This feature should be possible with the "ingress" sub-command.

Here 's a sniplet of my config:

!

interface GigabitEthernet1/0/23

description *** SPAN DESTINATION PORT ***

switchport access vlan 178

switchport mode access

!

monitor session 1 source vlan 110                          // PhoneVLAN = 110

monitor session 1 destination interface Gi1/0/23 ingress untagged vlan 178                      // 178 = Access-VLAN für Host

!

With this config it's possible to receive the span traffic, but no "regular" traffic is received or send.

Maybe anybody has a idea...

Cheers

Torsten

[Jonathan Schulenberg]

What model switch are you using? This is not supported on many lower-end switch models.

[torsten.brink]

Hi,

It's 3750-24, and should be supported

Cheers

Torsten

Sent from Cisco Technical Support iPhone App

[torsten.brink]

Hi NetPro's,

any idea's ?? Maybe I messed up the syntax?

Any feedback is welcome

Cheers

Torsten

Sent from Cisco Technical Support iPhone App